How To Conduct A Wireless Site Survey Kentucky

By Stephen Mitchell


The Internet is being used in almost every job in the modern world. However, working with a slow Internet will make operations to move very slowly. Testing equipment will help in prediction of radio waves propagation. Apart from this, you will be able to know whether they are interfering signals. Anything can affect the transmission. Therefore, you should not take wireless site survey Kentucky for granted.

The person doing the work ought to have a good knowledge on the wireless requirement. Access points need to be located at optimal locations. The possibility of signal interference should be taken into account too. To note is that signal strength increases when the device is near access point. On the other hand, the data rates will go down. Many of the devices used have low transmission power. Therefore, such should be planned for.

In order to succeed in this work, you have to know the ins and outs of the building you are working in. Ask the owner for the blueprints. A city map will be of help too. If they are not available, it is upon you to make a diagram that captures all the rooms and equipment inside the building. If this is impossible, make use of fire escape diagrams. Mapping software come in handy in outdoor surveys in the City Grayson, Kentucky.

Getting the blueprints does not mean that you do not have to inspect the building. Ensure that you have combed it through from top to bottom. There are some items which will not be included but are important in the survey. Thus, you need to take note of them before your plans are advanced.

Before you start working, check whether the building has network infrastructure. You can make use of such in interfacing access points. The common ones include Ethernet and even optical fiber. They are a great support for wireless networks.

Depending on the company you are working for, coverage may not be needed all through the building. Besides this, the clients might want some areas to have a strong coverage compared to others. That is why you have to inquire about this beforehand. Elevators, garages, patios, break rooms, bathrooms, utility rooms, stairwells, hallways and offices are some of areas where maximum coverage might be needed. Areas which are hardly utilized might be left out to avoid wastage of resources.

Choose the mounting location carefully. Vertical posts and even metal supports are great options in this case. Nonetheless, you should be on the lookout for other options. Besides this, ensure that you have chosen the antenna carefully. Poor choices can affect the outcome of the job.

Verify access points before you leave. If this step is missed then the entire survey and installation work will be for nothing. It is not a hard task given that there is software to help you accomplish this. You only need to get a laptop and use it to test how strong the signal is. It also tests the access points, signal quality and data rates.




About the Author:



Popular Posts