Important Points On Grandfather Clock Maintenance

By Angela Cole


Traditional watches need upkeep after a given time for them to remain in a good condition. It is important that they be repaired and cared for after working for two to three years. These traditional pieces carry memories from the past which should be cherished. However, they can be problematic at times requiring you to do the repair. This article provides you with tricks to use on grandfather clock maintenance.

You should always avoid hanging it near a heat source. This is because the high temperatures from heat will destroy the important parts. Due to this, avoid hanging the clock near fireplaces or windows where it will have contact with fire or the sun. You ought to also avoid hanging it in humid environments or damp places. This is because humid conditions may cause corrosion and damage parts as well.

Avoid cleaning the glass directly. You can be able to clean the glass of the timepiece with a window cleaner. However, ensure that you do not spray the glass directly since these products contain alcohol which can damage the shellac of the clock. Instead, you can spray the cleaner onto a piece of paper or cleaning towel before you clean the glass surface. Keep in mind that all antique watches have a shellac finish which adds value to it.

If you notice that the watch is running at a slow speed, you can look inside it to confirm whether the oscillator is moving freely. To remove dust, use a blower which can quickly solve the problem. If not, look for a professional as most likely the problem is in the inner mechanism. If you choose to leave it, more damage can be done up to a point where you cannot save it.

The old piece requires to be oiled and serviced after a while. The oiling is dictated by its age, the environment where it was hanged, how the repair was previously done and the type. Take it to a professional who can oil it well. The reason for this is that the various parts in the inside require different makes of oil. Using only one make may make the issue worse.

If you want to shift locations with the watch, ensure it is well packed. As you may not know how to handle it, search for a technician to do the work. Once it is well packed, moving it like other furniture will be effortless. If you do so without packing it well, problems such as chains coming off the sprockets can be realized making the watch not to run. Hiring a technician is much cheaper when compared to repairing it after the damage is done.

When you see that the watch is not running and that the hands are not moving, it is time to reset it. You can do so by moving backwards the minute hand until you notice that the required time is displayed on the dial. After this, check on the possible cause so that you can take care of the problem once.

Antique clocks have a unique and complex mechanism. There are some problems which you cannot fix on your own. They require an expert who can take out the components and check on them separately. These devices deserve the best care that can be given so as to continue working.




About the Author:



Popular Posts