Tips In Cleaning The Rhinestone Jewelry
Cleaning a rhinestone jewelry is a must since it is very valuable. It needs to be clean because, unlike other gemstones, it does not have a natural sparkle of its own. When it is well-cleaned, it produces a striking, bright color which easily mimics other large gemstones like diamonds or rubies with their luster
When the rhinestones are cleaned, they will have a bright and striking color. If the person is aiming for this, then there are various steps that one has to remember for the cleaning. Following these steps make it possible to achieve success with the task. First, make sure to cover the work station for this cleaning with paper towels.
It is important to have compressed air prepared for this. It is necessary to spray this can of compressed air onto the said accessory in order to eliminate the loose dirt attached onto it. There may be some caked-on dirt on the accessory. For these, opt to use toothpicks instead of needles or dental picks to avoid scratching the accessory's metal settings.
Rubbing alcohol is another useful tool for the said task. With the rubbing alcohol, which is oftentimes called isopropyl alcohol, evaporates easily so it should not leave moisture onto the said accessory. Without moisture, it will be impossible to damage the accessory's metal settings. It will not easily tarnish and darken, and are thus preserved from getting damaged beyond repair.
A cotton swab will come in handy in this cleaning process so make sure to obtain them along with the alcohol. The person needs to dip the cotton swab in the alcohol. Rub as much moisture coming from the tip as possible onto the paper towel. This prevents creating a puddle of alcohol into the gemstone.
The said item might have several rhinestones in it. For such cases, clean the item up by going over the stones one by one. There may be times when the stone becomes wet because of the excess alcohol on the swab. If this happens, just dry off the excess moisture on the stone through the other end of the swab.
Most people will focus on the part easily seen by others. While this might be good, do not forget to clean the back part of the said gem too. Turn the gem over to clean the metal finish area. If the cotton swab gets too dirty, then it might be time to change it. Dipping it into alcohol and rubbing off excess moisture should then be followed.
There are gemstones that are open-backed. For such stones, making a few mini-cotton swabs will be helpful. To make one, just remove a small portion of the cotton of the swab. Get a toothpick. Make sure to wet it. Stick the toothpick into the cotton. With this, one can clean off the stone's crevices.
The mini-cotton swabs are useful for the cleaning of a rhinestone jewelry too. For this, one has to follow the same steps with the cleaning of the entire gemstone. This basically include the wetting of the mini-cotton swabs, to the drying, and to the cleaning of the small spaces.
When the rhinestones are cleaned, they will have a bright and striking color. If the person is aiming for this, then there are various steps that one has to remember for the cleaning. Following these steps make it possible to achieve success with the task. First, make sure to cover the work station for this cleaning with paper towels.
It is important to have compressed air prepared for this. It is necessary to spray this can of compressed air onto the said accessory in order to eliminate the loose dirt attached onto it. There may be some caked-on dirt on the accessory. For these, opt to use toothpicks instead of needles or dental picks to avoid scratching the accessory's metal settings.
Rubbing alcohol is another useful tool for the said task. With the rubbing alcohol, which is oftentimes called isopropyl alcohol, evaporates easily so it should not leave moisture onto the said accessory. Without moisture, it will be impossible to damage the accessory's metal settings. It will not easily tarnish and darken, and are thus preserved from getting damaged beyond repair.
A cotton swab will come in handy in this cleaning process so make sure to obtain them along with the alcohol. The person needs to dip the cotton swab in the alcohol. Rub as much moisture coming from the tip as possible onto the paper towel. This prevents creating a puddle of alcohol into the gemstone.
The said item might have several rhinestones in it. For such cases, clean the item up by going over the stones one by one. There may be times when the stone becomes wet because of the excess alcohol on the swab. If this happens, just dry off the excess moisture on the stone through the other end of the swab.
Most people will focus on the part easily seen by others. While this might be good, do not forget to clean the back part of the said gem too. Turn the gem over to clean the metal finish area. If the cotton swab gets too dirty, then it might be time to change it. Dipping it into alcohol and rubbing off excess moisture should then be followed.
There are gemstones that are open-backed. For such stones, making a few mini-cotton swabs will be helpful. To make one, just remove a small portion of the cotton of the swab. Get a toothpick. Make sure to wet it. Stick the toothpick into the cotton. With this, one can clean off the stone's crevices.
The mini-cotton swabs are useful for the cleaning of a rhinestone jewelry too. For this, one has to follow the same steps with the cleaning of the entire gemstone. This basically include the wetting of the mini-cotton swabs, to the drying, and to the cleaning of the small spaces.