Useful And Essential Facts About Buffalo NY Towing Company
The reason for the towing process to appear like it is a modern concept is the innovation of improved and more complex tow trucks. The truth is contrary because towing has existed for nearly the same period that roads have had vehicles. Towing was made necessary by the development of automobiles. The outstanding variation is that a while back, the towing process was accomplished by employing very basic techniques. This is what Buffalo NY towing company are all about.
In fact, the first vehicles were towed using ropes and human labor. A group of six men were used to pull disabled vehicles from location to another. However, given the amount of time this process took and how laborious it was, it became apparent that a better method was needed. That is why the first tow trucks were invented.
The first tow truck models utilized chains and hooks, which were wound around the axle of rail frame of the vehicle being towed. With the development of modern tow trucks, this method is no longer being used widely like before. There are cases however where some tow service companies still employ the technique. Whereas this technique is secure, it is time consuming and may cause scratches to the hauled vehicle.
There is a better technique that involves use of tire- or wheel-lift devices. These do not destroy the build of the towed vehicle in any way. They only get in contact with tires. In this technique, there is installation of brackets at the front and the rear of the wheels prior to being held intact by use of steel pins. The brackets then clasp the wheels once the tow truck lifts the automobile.
The tow industry keeps getting new developments. Of late, there has been the introduction of the integrated lift tow truck. It is also called the self-loading wrecker. This integrated lift is a wheel-lift system controlled from the inside of the truck and then deployed with hydraulic power. The truck usually has a long arm referred to as stinger protruding from the back of the truck.
Wheel cradles from the stinger slide under the vehicle past the tires before the brackets are closed via hydraulics. This cradles the tires on both sides. The tow boom is then lifted by the tow truck, which lifts the drive wheels off the ground. At this point, the connection is complete and the truck can tow the vehicle away easily without any danger.
Not all situations need tow trucks. Sometimes, a flatbed may be required to get the job done. Flatbed trucks use electric cable winches to pull cars up onto the bed. The flatbed can be turned to the side or inclined hydraulically to allow the loading of the vehicle. Once loading has been completed, the truck is taken back to position for driving.
Whenever the vehicle that is supposed to be hauled is too heavy or badly damaged for an ordinary truck, a flatbed is normally used. If the automobile is being towed with the wheels rolling, there is a probability the the transmission system will be damaged. Flat beds are best used in such circumstances.
In fact, the first vehicles were towed using ropes and human labor. A group of six men were used to pull disabled vehicles from location to another. However, given the amount of time this process took and how laborious it was, it became apparent that a better method was needed. That is why the first tow trucks were invented.
The first tow truck models utilized chains and hooks, which were wound around the axle of rail frame of the vehicle being towed. With the development of modern tow trucks, this method is no longer being used widely like before. There are cases however where some tow service companies still employ the technique. Whereas this technique is secure, it is time consuming and may cause scratches to the hauled vehicle.
There is a better technique that involves use of tire- or wheel-lift devices. These do not destroy the build of the towed vehicle in any way. They only get in contact with tires. In this technique, there is installation of brackets at the front and the rear of the wheels prior to being held intact by use of steel pins. The brackets then clasp the wheels once the tow truck lifts the automobile.
The tow industry keeps getting new developments. Of late, there has been the introduction of the integrated lift tow truck. It is also called the self-loading wrecker. This integrated lift is a wheel-lift system controlled from the inside of the truck and then deployed with hydraulic power. The truck usually has a long arm referred to as stinger protruding from the back of the truck.
Wheel cradles from the stinger slide under the vehicle past the tires before the brackets are closed via hydraulics. This cradles the tires on both sides. The tow boom is then lifted by the tow truck, which lifts the drive wheels off the ground. At this point, the connection is complete and the truck can tow the vehicle away easily without any danger.
Not all situations need tow trucks. Sometimes, a flatbed may be required to get the job done. Flatbed trucks use electric cable winches to pull cars up onto the bed. The flatbed can be turned to the side or inclined hydraulically to allow the loading of the vehicle. Once loading has been completed, the truck is taken back to position for driving.
Whenever the vehicle that is supposed to be hauled is too heavy or badly damaged for an ordinary truck, a flatbed is normally used. If the automobile is being towed with the wheels rolling, there is a probability the the transmission system will be damaged. Flat beds are best used in such circumstances.
About the Author:
Buffalo NY towing company provides a comprehensive service to all car owners. To contact these experts for your tire change go to http://www.towingbuffalo.com/flat-tire-tire-change.